Makita LF1000 User Manual download pdf (Page 15)

P 15/ 30

Repair

[3] DISASSEMBLY/ASSEMBLY

[3] -8. Frame Section

Fig. 37

Fig. 39

Fig. 38

Fig. 40

DISASSEMBLING

1) After removing Switch box, place the Frame section as illustrated in Fig. 37, and remove four Square pipes by

unscrewing eight M8x20 Hex socket head bolts.

2) Place the Frame section as illustrated in Fig. 38. Then, by removing four M10 Hex nuts from Pipe 32 complete

(with Makita mark label) and Pipe 32 (without Makita mark label), separate right Frame from left Frame.

Hex socket head bolt M8x20 (8 pcs)

Square pipe

(4 pcs)

3) From each of *right and *left Frames, remove Pipe 32 complete (Pipe 32) and Screw M10. (Fig. 39)

4) Caps can be removed from Frame by tapping the joint of Cap and Frame with slotted screwdriver. (Fig. 40)

Note: Do not reuse Caps removed from Frame because it is deformed or damaged when removed.

Pipe 32

Pipe 32 complete

Screw M10

Cap

Hex nut M10

Spring washer 10

Flat washer 10

Pipe 32 complete

(4 pcs each)

Frame, right

Frame, left

Pipe 32

Note:

This end of Screw M10 is screwed in the threaded hole

of Frame. Therefore, unscrew when removing from Frame.

Cap

(See Note below.)

*Right Frame and Left Frame;

Are exactly the same in size and shape.

However, some different parts such as Switch box

or Lock lever are assembled to them.

For convenience, therefore, we call the one on

operator's right hand "Right Frame" and the other

"Left Frame".

1 ... 14 15 16 ... 30

Comments to this Manuals

No comments

Makita LF1000 User Manual Page 15

Comments to this Manuals

Related products and manuals for Circular saws Makita LF1000