Makita HR4511C User Manual download pdf (Page 4)

P 4/ 23

[3] DISASSEMBLY/ASSEMBLY

[3] -1. Chuck Section

Repair

DISASSEMBLY

4x14 Tapping

Screw (2 pcs.)

Handle section

1) Disassemble Handle section. (Fig. 4) Hold the machine upright and disassemble Chuck section in the order of Figs. 5

to 11.

Connector

Controller

Motor

housing

Tool holder cap

Holding the machine upright with

1R350 as illustrated below, remove

Tool holder cap.

1R350

1. Separate Handle section from Motor housing

by unscrewing 5x25 Tapping screws.

2. Pull off Connector from Controller.

3. After removing 4x14 tapping screws, disassemble

Controller from Motor housing.

Ring spring 25

While pulling down Chuck cover, remove Ring spring 25

from the Tool holder using 1R003 with 1R212.

1R003 with 1R212

Chuck cover

1R003

Fig. 4

Fig. 5

Fig. 6

Fig. 7

Tool holder

Ring 28

After removing Ring spring 25, disassemble

the following parts in order from Tool holder.

1. Ring 28

2. Chuck cover

3. Spacer

Ring spring 25

Chuck cover

Spacer

Chuck ring

5x25 Tapping

screw (6 pcs.)

1 2 3 4 5 6 7 8 9 ... 22 23

Comments to this Manuals

No comments

Makita HR4511C User Manual Page 4

Comments to this Manuals

Related products and manuals for Rotary hammers Makita HR4511C