Makita HR160D User Manual download pdf (Page 4)

ENGLISH (Original instructions)

Explanation of general view

1 Set plate

2 Battery cartridge

3 Switch trigger

4 Reversing switch

5 Action mode changing knob

6 Bit shank

7 Bit grease

8Bit

9 Chuck cover

10 Chisel adapter

11 Clamp screw

12 Chisel

13 Depth gauge

14 Dust cup

15 Blow-out bulb

16 Drill chuck assembly

SPECIFICATIONS

Model HR160D

Capacities

Concrete ............................................................ 16 mm

Steel ................................................................... 13 mm

Wood .................................................................. 20 mm

No load speed (min

-1

) .......................................... 0 – 950

Blows per minute ............................................... 0 – 3,600

Overall length ..................................................... 296 mm

Net weight ............................................................. 2.5 kg

Rated voltage ..................................................... D.C.12 V

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Specifications and battery cartridge may differ from

country to country.

• Weight, with battery cartridge, according to EPTA-Pro-

cedure 01/2003

ENE043-1

Intended use

The tool is intended for hammer drilling and drilling in

brick, concrete and stone as well as for chiselling work.

It is also suitable for drilling without impact in wood,

metal, ceramic and plastic.

GEA010-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future refer-

ence.

GEB046-2

CORDLESS ROTARY HAMMER SAFETY

WARNINGS

1. Wear ear protectors. Exposure to noise can cause

hearing loss.

2. Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

3. Hold power tools by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring. Cutting

accessory contacting a “live” wire may make

exposed metal parts of the power tool “live” and

could give the operator an electric shock.

4. Wear a hard hat (safety helmet), safety glasses

and/or face shield. Ordinary eye or sun glasses

are NOT safety glasses. It is also highly recom-

mended that you wear a dust mask and thickly

padded gloves.

5. Be sure the bit is secured in place before opera-

tion.

6. Under normal operation, the tool is designed to

produce vibration. The screws can come loose

easily, causing a breakdown or accident. Check

tightness of screws carefully before operation.

7. In cold weather or when the tool has not been

used for a long time, let the tool warm up for a

while by operating it under no load. This will

loosen up the lubrication. Without proper warm-

up, hammering operation is difficult.

8. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

9. Hold the tool firmly with both hands.

10. Keep hands away from moving parts.

11. Do not leave the tool running. Operate the tool

only when hand-held.

12. Do not point the tool at any one in the area when

operating. The bit could fly out and injure some-

one seriously.

13. Do not touch the bit or parts close to the bit

immediately after operation; they may be

extremely hot and could burn your skin.

14. Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation

and skin contact. Follow material supplier safety

data.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this instruc-

tion manual may cause serious personal injury.

1 2 3 4 5 6 7 8 9 ... 43 44

Comments to this Manuals

No comments

Makita HR160D User Manual Page 4

Comments to this Manuals

Related products and manuals for Rotary hammers Makita HR160D