Makita BHR261 User Manual download pdf (Page 17)

P 17/ 24

Repair

[3] DISASSEMBLY/ASSEMBLY

[3]-7. Impact bolt in Tool holder complete (BHR261)/ Tool holder guide complete (BHR261T)

DISASSEMBLING

(1) When Striker is left in Tool holder (guide) complete, push Striker out of Tool holder (guide) complete by inserting 1R281

from the top end and striking the 1R281 with plastic hammer.

(2) Remove Tool holder (guide) section as mentioned in the clause of [3]-5.

(3) Remove Ring spring 28 from Tool holder (guide) complete and disassemble Impact bolt section. (Figs. 39 to 42)

[Cap 35 side]

[Inner housing complete side]

Ring spring 28

Ring spring 28 can be pulled off from Tool

holder (guide) complete when completely

remove from the groove.

Disassemble Impact bolt

section by striking Tool

holder (guide) complete

against workbench.

Note: Be sure to replace Ring spring 28

when assembling Tool holder (guide)

section.

Fig. 41 Fig. 42

Tool holder

(guide) complete

Sleeve 9

Impact bolt

Ring 10

Cushion ring 13

O ring case with

O ring 9 fit inside

Impact bolt section

Fig. 40

Fig. 39

clearance of Ring spring 28 Ring spring 28

Note: When the clearance of Ring spring 28

is in the hole, slide the clearance to

the blind side using a slotted screwdriver.

Ring spring 28

1R038

Vise

Tap Ring spring 28 from the two holes alternately to push

downward.

Tool holder complete

Tool holder (guide) complete

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Makita BHR261 User Manual Page 17

Comments to this Manuals

Related products and manuals for Rotary hammers Makita BHR261