Makita BHR261 User Manual download pdf (Page 11)

P 11/ 24

Repair

[3] DISASSEMBLY/ASSEMBLY

[3]-3. Change lever

While pushing Lock button into Change lever,

turn Change lever to Drill mode.

While pushing Lock button into Change lever,

fit Change lever completely to Gear housing complete.

Note: Be sure to check Change lever works properly

after assembling.

Insert Slotted screwdriver between Change lever and

Gear housing complete, then lever up Change lever.

Change lever Slotted screwdriver

Lock button

Drill mode

Lock button Change lever

DISASSEMBLING

Fig. 19

Fig. 20

(thick pin of

Change lever)

Hammer mode

thin pin of

Change lever

ASSEMBLING

Fig. 21

Change plate comes into sight through

Change lever insertion hole of

Gear housing complete.

While hooking the thin pin of Change lever to

Change plate from Hammer mode side,

turn Change lever to Drill mode side.

Note: Change lever is incompletely fit to Gear

housing complete in the above step.

Drill mode

Change plate

Viewed from the upper side

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

No comments

Makita BHR261 User Manual Page 11