Makita BHR261 User Manual download pdf (Page 10)

Change

cover

Change ring

[3] DISASSEMBLY/ ASSEMBLY

[3] -2. Drill chuck assembly for BHR261T (cont.)

ASSEMBLING

Chuck

holder

Chuck holder

Short leg of

Torsion spring 31

Long leg of

Torsion

spring 31

Hole for accepting

Torsion Spring 31

1) Holding Chuck holder's Flat portion in vise. Assemble Drill chuck to Chuck holder by turning clockwise using Hex

wrench 10.

2) Secure Drill chuck with M6x22 Flat head screw by turning counterclockwise using Impact driver.

3) Assemble Drill chuck to Spacer. (Fig. 15) And mount two Steel balls 6. (Fig. 16)

4) Mount Torsion spring 31. And assemble the Drill chuck to Change cover. (Fig. 17)

5) Mount Steel ball 5, Leaf spring and Flat washer 24 to Chuck holder. And secure them with Ring spring 21. (Fig. 18)

Spacer

Insert the short leg of Torsion spring 31

into hole of Chuck holder using pliers.

Fitting Chuck holder's flat portions

to Spacer, mount Drill chuck to

Spacer.

Fig. 15 Fig. 16

Chuck holder

Steel ball 6 (2pcs.)

Note: Apply Makita grease R No.00 to Steel

balls 6 to avoid falling them off.

Fig. 18

Fig. 17

Turn Drill chuck approx. 75degrees

clockwise. Drill chuck can be

assembled to Change cover.

Drill

chuck

75 degrees

Ring spring 21

Steel ball 5

Flat washer 24

Leaf spring

Change

cover

Torsion

spring 31

Insert the long leg of Torsion spring 31

into hole of Change cover through hole

of Change ring.

Assemble Change ring to Change cover.

Refer to Fig. 6.

Repair

P 10/ 24

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comments to this Manuals

No comments

Makita BHR261 User Manual Page 10

Comments to this Manuals

Related products and manuals for Rotary hammers Makita BHR261