Makita HM1203C Instruction Manual download pdf (Page 2)

ENGLISH (Original instructions)

SPECIFICATIONS

Model HM1213C HM1203C

Blows per minute 950 - 1,900 min

-1

Overall length 576 mm

Net weight 10.8 kg 9.7 kg

Safety class II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Note: Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-4

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE045-1

Intended use

The tool is intended for chiselling work in concrete, brick,

stone and asphalt as well as for driving and compacting

with appropriate accessories.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated in accordance with European

Standard and can, therefore, also be used from sockets

without earth wire.

For Model HM1213C

ENG102-2

For European countries only

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

) : 75 dB(A)

Sound power level (L

) : 95 dB(A)

Uncertainty (K) : 2.5 dB(A)

Wear ear protection

ENG216-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745-2-6:

Work mode : chiseling function with side handle

Vibration emission (a

h,CHeq

) : 7.0 m/s

Uncertainty (K) : 1.5 m/s

For Model HM1203C

ENG102-2

For European countries only

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

) : 81 dB(A)

Sound power level (L

) : 95 dB(A)

Uncertainty (K) : 2 dB(A)

Wear ear protection

ENG216-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745-2-6:

Work mode : chiseling function with side handle

Vibration emission (a

h,CHeq

) : 15.5 m/s

Uncertainty (K) : 1.5 m/s

ENG901-1

•

The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

1 2 3 4 5 6 7 ... 11 12

Comments to this Manuals

No comments

Makita HM1203C Instruction Manual Page 2

Comments to this Manuals

Related products and manuals for Power tools Makita HM1203C