Electronic Jig Saw Length of stroke MODEL 4303C weight I Net Strokes Overall per minute length Max. cutting capacities Wood Steel INSTRUCTION MANUAL
I I Front flush cuts Loosen the bolt on the back of the base with the hex wrench, then slide the base backwards. Check the contact between
Using guide rule (Rip fence) When cutting widths of under 150 mm (6") repeatedly, use of the guide rule will assure fast, clean, straight cuts.
To attach the circular guide, use the pin, inserting it in the center hole (arrow) and secure it with the threaded knob. Then slide the base
MAINTENANCE CAUTION: Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. To maintain
Jig saw blade H 1.5 - 3 mm thick 11/16’’ - 1/8”) H 1 - 6 mm thick 1 - 3 mm thick (3164‘’ - 114“) 13/64” - 1/8”) H 3 - 55 mm thick (1/8” - 2-1/8”) H 3
May-19--'94 US ELECTRONIC JIG SAW Model 4303C Note: The switch and other part configurations may differ from country to country. 15
MODEL 4303C ZD DESCRIPTION =E 1 2 3 4 5 6 7 8 9 0 11 2 3 14 18 19 20 21 22 23 24 25 26 2, 28 29 30 31 32 33 34 35 36 31 38 39 40 - 1 1 1 1 1 1 4 1 1 1
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RI
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15.
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified on
Installing Makita jig saw blade CAUTION : Always be sure that the tool is switched off and unplugged before installing or removing the blade. Use the
Installing universal shank jig saw blade CAUTION : Always be sure that the tool is switched off and unplugged before installing or removing the blad
Straight line or orbital cutting action I Conventional jig saws cut with a straight line action, that is, the blade moves only up and down in a s
Speed change To adjust the tool speed, turn the speed change dial. The tool speed can be adjusted between 1,000 and 3,000 strokes per minute.
Operation Turn the tool on and wait until the blade attains full speed. Then rest the base flat on the workpiece and gently move the tool forward
Comments to this Manuals