Makita 9227CY Specifications download pdf (Page 7)

FUNCTIONAL

DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Shaft lock

CAUTION:

• Never actuate the shaft lock when the spindle is moving.

The tool may be damaged.

Press the shaft lock to prevent spindle rotation when install-

ing or removing accessories.

Switch action

CAUTION:

• Before plugging in the tool, always check to see that the

switch trigger actuates properly and returns to the “OFF”

position when released.

• Switch can be locked in “ON” position for ease of

operator comfort during extended use. Apply caution

when locking tool in “ON” position and maintain firm

grasp on tool.

To start the tool, simply pull the switch trigger. Tool speed is

increased by increasing pressure on the switch trigger.

Release the switch trigger to stop.

For continuous operation, pull the switch trigger and then

push in the lock button.

To stop the tool from the locked position, pull the switch trig-

ger fully, then release it.

Speed adjusting dial

The tool speed can be changed by turning the speed adjust-

ing dial to a given number setting from 1 to 6. (At the time

when the switch trigger is fully pulled.)

Higher speed is obtained when the dial is turned in the direc-

tion of number 6. And lower speed is obtained when it is

turned in the direction of number 1.

1. Shaft lock

003432

1. Lock button

2. Switch trigger

003435

1. Speed adjusting dial

003440

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

Makita 9227CY Specifications Page 7