Makita 9227CY Specifications download pdf (Page 9)

Installing side grip (handlle) (For 9227CY only)

CAUTION:

• Always be sure that the side grip is installed securely

before operation.

Screw the side grip securely on the position of the tool as

shown in the figure.

Installing or removing the wool bonnet

(optional accessory)

To install the wool bonnet, first remove all dirt or foreign mat-

ter from the backing pad. Press the shaft lock and screw the

backing pad onto the spindle. Insert the sleeve 18 into the

center hole of the backing pad.

Using the sleeve 18 as a positioning guide, install the wool

bonnet on the backing pad with the sleeve 18 inserted

through the center hole of the wool bonnet. Then remove the

sleeve 18 from the backing pad.

To remove the wool bonnet, just tear it off the backing pad.

Then unscrew the backing pad while pressing the shaft lock.

Installing or removing abrasive disc

(optional accessory)

NOTE:

• Use sander accessories specified in this manual. These

must be purchased separately.

Mount the rubber pad onto the spindle. Fit the abrasive disc

on the rubber pad and screw the lock nut onto the spindle.

To tighten the lock nut, press the shaft lock firmly so that the

spindle cannot revolve, then use the lock nut wrench and

securely tighten clockwise.

To remove the disc, follow the installation procedure in

reverse.

003805

1. Wool bonnet

2. Sleeve 18

3. Backing pad

4. Spindle

5. Shaft lock

003467

1. Lock nut

2. Abrasive disc

3. Rubber pad

4. Spindle

003457

1. Lock nut wrench

2. Shaft lock

003458

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Makita 9227CY Specifications Page 9

Comments to this Manuals

Related products and manuals for Power sanders Makita 9227CY