Makita G4300L Owner's Manual download pdf (Page 17)

In a dry or wooded area, it is recommendable to use the prodoct with a spark arrester.

Some areas require the

use of a spark arrester. Please check your local laws and regulations before operating your

prodoct

The spark arrester must be cleaned regularly to keep it functioning as designed.

A clogged spark arrester :

■■

Prevents the flow of exhaust gas

■■

Reduces engine output

■■

Increases fuel consumption

■■

Makes starting difficult

If the engine has been running, the muffler and the spark arrester will be very hot. Allow the muffler to cool

before cleaning the spark arrester.

How to remove the spark arrester

1. Remove the flange bolts from the muffler cover and

remove the muffler cover.

2. Remove the special screw from the spark arrester

and remove the spark arrester from the muffler.

SPARK

ARRESTER

SCREEN

MUFFLER

TAIL SCREEN

TAIL SCREEN COVER

SCREW

Clean the spark arrester screen

Use a brush to remove carbon deposits from the spark

arrester screen.

Be careful to avoid damaging the screen.

The spark arrester must be free of breaks and holes.

Replace the spark arrester if it is damaged.

Install the spark arrester, and muffler protector in the

reverse order of disassembly.

SPARK ARESSTER SCREEN

6. SPARK ARRESTER

G2800L(US)_GU1843 2004.2.6 1:14 PM ページ11

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Makita G4300L Owner's Manual Page 17