Makita LS0714 Instruction Manual download pdf (Page 5)

30. Do not abuse cord. Never yank cord to discon-

nect it from the receptacle. Keep cord away from

heat, oil, water and sharp objects.

31. NEVER stack workpieces on the table top to

speed cutting operations. Cut only one piece at a

time.

32. Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation

and skin contact. Follow material supplier safety

data.

SAVE THESE INSTRUCTIONS

WARNING:

MISUSE or failure to follow the safety

rules stated in this instruction manual

may cause serious personal injury.

INSTALLATION

Bench mounting

When the tool is shipped, the handle is locked in the low-

ered position by the stopper pin. Release the stopper pin

by lowering the handle slightly and pulling the stopper

pin.

This tool should be bolted with two bolts to a level and

stable surface using the bolt holes provided in the tool’s

base. This will help prevent tipping and possible injury.

Turn the adjusting bolt clockwise or counterclockwise so

that it comes into a contact with the floor surface to keep

the tool stable.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on

the tool.

Blade guard

When lowering the handle, the blade guard rises auto-

matically. The guard is spring loaded so it returns to its

original position when the cut is completed and the han-

dle is raised. NEVER DEFEAT OR REMOVE THE

BLADE GUARD OR THE SPRING WHICH ATTACHES

TO THE GUARD.

In the interest of your personal safety, always maintain

the blade guard in good condition. Any irregular opera-

tion of the blade guard should be corrected immediately.

Check to assure spring loaded return action of guard.

NEVER USE THE TOOL IF THE BLADE GUARD OR

SPRING ARE DAMAGED, FAULTY OR REMOVED.

DOING SO IS HIGHLY DANGEROUS AND CAN

CAUSE SERIOUS PERSONAL INJURY.

If the see-through blade guard becomes dirty, or sawdust

adheres to it in such a way that the blade is no longer

easily visible, unplug the saw and clean the guard care-

fully with a damp cloth. Do not use solvents or any petro-

leum-based cleaners on the plastic guard.

If the blade guard is especially dirty and vision through

the guard is impaired, use the supplied socket wrench to

loosen the hex bolt holding the center cover. Loosen the

hex bolt by turning it counterclockwise and raise the

blade guard and center cover. With the blade guard so

positioned, cleaning can be more completely and effi-

ciently accomplished. When cleaning is complete,

1. Stopper pin

1. Bolt

003923

003924

1. Adjusting bolt

1. Blade guard

003925

002252

1 2 3 4 5 6 7 8 9 10 ... 67 68

Comments to this Manuals

No comments

Makita LS0714 Instruction Manual Page 5

Comments to this Manuals

Related products and manuals for Mitre saws Makita LS0714