Makita MT560 User Manual download pdf (Page 3)

3

8. Dress properly.

Do not wear loose clothing or jewellery, they

can be caught in moving parts. Rubber

gloves and non-skid footwear are recom-

mended when working outdoors. Wear pro-

tecting hair covering to contain long hair.

9. Use safety glasses and hearing protec-

tion.

Also use face or dust mask if the cutting

operation is dusty.

10. Connect dust extraction equipment.

If devices are provided for the connection of

dust extraction and collection facilities ensure

these are connected and properly used.

11. Do not abuse the cord.

Never carry the tool by the cord or yank it to

disconnect it from the socket. Keep the cord

away from heat, oil and sharp edges.

12. Secure work.

Use clamps or a vice to hold the work. It is

safer than using your hand and it frees both

hands to operate the tool.

13. Do not overreach.

Keep proper footing and balance at all times.

14. Maintain tools with care.

Keep cutting tools sharp and clean for better

and safer performance. Follow instructions

for lubrication and changing accessories.

Inspect tool cord periodically and if damaged

have it repaired by an authorized service

facility. Inspect extension cords periodically

and replace, if damaged. Keep handles dry,

clean and free from oil and grease.

15. Disconnect tools.

When not in use, before servicing and when

changing accessories such as blades, bits

and cutters.

16. Remove adjusting keys and wrenches.

Form the habit of checking to see that keys

and adjusting wrenches are removed from

the tool before turning it on.

17. Avoid unintentional starting.

Do not carry a plugged-in tool with a finger on

the switch. Ensure switch is off when plug-

ging in.

18. Use outdoor extension leads.

When tool is used outdoors, use only exten-

sion cords intended for outdoor use.

19. Stay alert.

Watch what you are doing. Use common

sense. Do not operate tool when you are

tired.

20. Check damaged parts.

Before further use of the tool, a guard or

other part that is damaged should be care-

fully checked to determine that it will operate

properly and perform its intended function.

Check for alignment of moving parts, free

running of moving parts, breakage of parts,

mounting and any other conditions that may

affect its operation. A guard or other part that

is damaged should be properly repaired or

replaced by an authorized service center

unless otherwise indicated in this instruction

manual. Have defective switches replaced by

an authorized service facility. Do not use the

tool if the switch does not turn it on and off.

21. Warning.

The use of any accessory or attachment,

other than those recommended in this

instruction manual or the catalog, may

present a risk of personal injury.

22. Have your tool repaired by a qualified per-

son.

This electric tool is in accordance with the rel-

evant safety requirements. Repairs should

only be carried out by qualified persons using

original spare parts, otherwise this may result

in considerable danger to the user.

1 2 3 4 5 6 7 8 ... 11 12

Comments to this Manuals

No comments