Makita MT560 User Manual download pdf (Page 7)

FUNCTIONAL

DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Adjusting depth of cut

CAUTION:

• After adjusting the depth of cut, always tighten the

clamping screws securely.

Loosen the clamping screw on the depth guide and move the

base up or down. At the desired depth of cut, secure the

base by tightening the clamping screw.

For cleaner, safer cuts, set cut depth so that no more than

one blade tooth projects below workpiece. Using proper cut

depth helps to reduce potential for dangerous KICKBACKS

which can cause personal injury.

Bevel cutting

Loosen two clamping screws on the bevel plates on the front

and back of the base. Set for the desired angle (0° - 45°) by

tilting accordingly, then tighten the clamping screws securely.

Sighting

For straight cuts, align the A position on the front of the base

with your cutting line. For 45° bevel cuts, align the B position

with it.

1. Clamping screw

004027

1. Clamping screw

004028

1. Base plate

004029

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Makita MT560 User Manual Page 7