Makita 5820 Instruction Manual

185 mm (744”) MODEL 5820 Equipped with Electric Brake INSTRUCTION MANUAL ‘ION SPEC IF I CAT I 0 N S No load speed Overall I Net Max. cutting capacit

ACCESSORI ES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of an

Feb.-O6-'89 US 185 mm (7-1/4") @mm CIRCULAR SAW - Model 5820 Note: The switch, noise suppressor and other part configurations may differ f

MODEL 5820 Feb-06-'89 US /LM ,$&, DESCRIPTION ""df ,,!& DESCRIPTION MACHINE r ~ 1 2 3 4 5 6 I 8 9 10 11 12 13 14 15 16 lJ 18

IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER-

14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15.

ADDITIONAL SAFETY RULES 1. Wear hearing protection. 2. Keep Guards In Place and In Working Order. Never wedge or tie lower guard open. Check operatio

NEVER place your hand or fingers behind the saw. If kickback oc- curs, the saw could easily jump backwards over your hand, possi- bly causing severe

13. Place the wider portion of the saw base on that part of the workpiece which is solidly supported, not on the section that will fall off when the c

Installing or removing saw blade CAUTION : Always be sure that the tool is switched off and unplugged before installing or removing the blade. The

Adjusting depth of cut Loosen the wing nut on the depth guide and move the base up or down. At the desired depth of cut, secure the ba

Operation Grasp the rear handle with your right hand, the front grip with your left. Set the base plate on the workpiece to be cut without the b