Makita 5820 Instruction Manual download pdf (Page 4)

ADDITIONAL SAFETY RULES

Wear hearing protection.

Keep Guards In Place and

Working Order.

Never wedge or tie lower guard open. Check operation of lower guard be-

fore each use. Don't use if lower guard does not close briskly over saw blade.

CAUTION: If saw is dropped, lower guard may be bent, restricting

full

return.

Keep Blades Clean and Sharp.

Sharp blades minimize stalling and kickback.

DANGER: Keep Hands Away From Cutting Area.

Keep hands away from blades.

Don't

reach underneath work while blade

is rotating. Don't attempt to remove cut material when blade is moving.

CAUTION: Blades coast after turn off.

Large panels must be supported as

shown

Fig.

to minimize the risk

of blade pinching and kickback.

When cutting operation requires

the resting of the saw on the work

piece, the saw shall be rested on

the larger portion and the smaller

piece cut off.

Support Large Panels.

avoid kickback, do support board

or panel near the cut.

Fig.

Don't support board or panel away

from the cut.

Fig.

Use Rip Fence.

Guard Against Kickback.

Always use a fence or straight edge guide when ripping.

Kickback occurs when the saw stalls rapidly and is driven back towards the

operator. Release switch immediately if blade binds or saw stalls. Keep blades

sharp. Support large panels as shown

Fig.

Use fence or straight edge

guide when ripping. Don't force tool. Stay alert exercise control. Don't re-

move saw from work during a cut while the blade is moving.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Makita 5820 Instruction Manual Page 4

Comments to this Manuals

Related products and manuals for Hand tools supplies Makita 5820