Makita MT560 User Manual download pdf (Page 8)

Switch action

CAUTION:

• Before plugging in the tool, always check to see that the

switch trigger actuates properly and returns to the “OFF”

position when released.

For tool with lock button

To start the tool, simply pull the switch trigger. Release the

switch trigger to stop.

For continuous operation, pull the switch trigger and then

push in the lock button.

To stop the tool from the locked position, pull the switch trig-

ger fully, then release it.

For tool without lock button

To start the tool, simply pull the switch trigger. Release the

switch trigger to stop.

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

Removing or installing saw blade

CAUTION:

• Be sure the blade is installed with teeth pointing up at

the front of the tool.

• Use only the Makita wrench to install or remove the

blade.

To remove the blade, press the shaft lock so that the blade

cannot revolve and use the wrench to loosen the hex bolt

counterclockwise. Then remove the hex bolt, outer flange

and blade.

1. Switch trigger

2. Lock button

004030

1. Hex wrench

2. Shaft lock

004031

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Makita MT560 User Manual Page 8