Makita BHS630 User Manual download pdf (Page 13)

[4] ADJUSTMENT

[4]-2. Adjusting Accuracy of Parallel of Base to Saw blade

Mounting Saw blade to the machine, set the machine to the lowest possible position to obtain the max. cut depth.

But, do not attach Battery to the machine.

Adjust accuracy of 90 degree cut as drawn in Fig. 18.

Following two kinds of adjustment screws are used in this product.

1. M6x8 Hex socket head set screw for adjusting Accuracy of 90 degrees .

2. M5x8 hex socket head set screw for adjusting Accuracy of Parallel of Base to saw blade

See the following drawing in Fig. 17.

Mounting Saw blade to the machine, set the machine to the lowest possible position to obtain the max. cut depth.

But, do not attach Battery to the machine.

Adjust accuracy of parallel of Base to saw blade as drawn in Fig. 19.

Fig. 18

Fig. 17

M6x8 Hex socket

head set bolt

Apply triangular rule as per the illustration

and adjust the accuracy of right angle by turning

M6x8 Hex socket head set bolt with hex wrench,

until the two sides of the adjusting jig fit to Base

and saw blade completely.

1. M6x8 Hex socket head set screw

for adjusting accuracy of 90 degree

of Base to saw blade

2. M5x8 Hex socket head set screw

for adjusting accuracy of parallel

of Base to saw blade

Triangular rule or 1R208

Hex wrench

[4]-1. Adjusting Accuracy of 90 degree cut

Base

Rear side

of Base

1. Loosen M5x8 Hex socket head set screw

with Hex wrench a little bit.

2. Apply square to the machine as per the

illustration.

3. Adjust by moving the rear side of base,

until the Square fits both to the saw blade

and the front edge of base.

M5x8 Hex socket

head set screw

Square

Saw blade

Front edge of

Base

Repair

P 13/ 16

1 2 ... 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Makita BHS630 User Manual Page 13

Comments to this Manuals

Related products and manuals for Cordless chainsaws Makita BHS630