Makita DVC350 Instruction Manual download pdf (Page 6)

• Do not pull the hose to carry the cleaner. Pulling

the hose may cause deformation or damage to the

hose.

011119

Insert the "A" end of the hose to the suction opening of

the cleaner and turn it clockwise all the way until it locks.

Attach the cuff on the "B" end of the hose and then

connect it to the dust outlet of an power tool.

Replacing the front cuff

Change the front cuff of the hose according to the dust

outlet size of a power tool you use.

011120

To remove the front cuff, hold the hose and turn it

counterclockwise.

To mount the front cuff, turn it clockwise and then

screw it in until it stops.

OPERATION

WARNING:

• Do not use the shoulder strap when working in a

high place.

• When using the cleaner as a stationary cleaner,

place it on a flat and stable surface.

Vacuum Cleaner

011122

When using the cleaner as a portable cleaner,

cross-hanging the shoulder strap before the breast is

difficult to drop the cleaner.

011123

NOTE:

• Long cut-off decorative paper that may be

produced by plaster board cutting work depending

on the conditions of workpiece to be cut and that

may be stuffed inside the hose may cause the

hose suction blocking. When this occurs, change

the cutting depth setting of power tool to deeper

depth, which will relieve the hose suction blocking.

CAUTION:

• When the dust bag is just new, dust may come out

of its surface. Using it a few times will minimize the

dust leak from the surface.

1. Decorative

paper

2. Saw blade

3. Base

4. Cutting depth

5. Plaster board

1. Front cuff

2. Hose

3. Remove

4. Install

1. Dust outlet

2. Power tool

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Comments to this Manuals

No comments

Makita DVC350 Instruction Manual Page 6

Comments to this Manuals

Related products and manuals for Vacuum cleaners Makita DVC350