Makita DVC350 Instruction Manual download pdf (Page 4)

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the cleaner is switched off and

the battery cartridge is removed before adjusting or

checking function on the cleaner.

Installing or removing battery cartridge

011112

•

Always switch off the cleaner before insertion or

removal of the battery cartridge.

• To remove the battery cartridge, withdraw it from

the cleaner while sliding the button on the front of

the cartridge as shown in the figure.

• To insert the battery cartridge, align the tongue on

the battery cartridge with the groove in the housing

and slip it into place. Always insert it all the way

until it locks in place with a little click. If you can

see the red part on the upper side of the button, it

is not locked completely. Insert it fully until the red

part cannot be seen. If not, it may accidentally fall

out of the cleaner, causing injury to you or

someone around you.

• Do not use force when inserting the battery

cartridge. If the cartridge does not slide in easily, it

is not being inserted correctly.

Battery protection system

The cleaner is equipped with the protection system,

which automatically cuts off the output power for its long

service life.

The cleaner stops during operation when the cleaner

and/or battery are placed under the following situation.

This is caused by the activation of protection system and

does not show the cleaner trouble.

• When the cleaner is overloaded:

At this time, press the "OFF" button and

remove causes of overload and then press

the "HIGH/LOW" button again to restart.

•

When battery cells get hot: (refer to the note below.)

If any operation of the "HIGH/LOW" button

and the "OFF" button, the motor will remain

stopped. At this time, stop use of the cleaner

and cool or charge the battery cartridge after

removing it from the cleaner.

• When the remaining battery capacity gets low:

If any operation of the "HIGH/LOW" button

and the "OFF" button, the motor will remain

stopped. At this time, remove the battery

cartridge from the cleaner and charge it.

NOTE:

• This temperature-sensitive protection is applied

only when the cleaner is used with a battery

cartridge with a star mark.

011389

Switch action

011121

To start the cleaner, simply press the "HIGH/LOW"

button. To switch off, press the "OFF" button. To change

the cleaner speed, press the "HIGH/LOW" button. The

first press on this button is for high speed and the

second press for low speed and then each press on this

button repeats the high/low speed cycle alternatively.

ASSEMBLY

CAUTION:

• Always be sure that the cleaner is switched off and

the battery cartridge is removed before carrying

out any work on the cleaner.

• Any work with the battery cartridge being installed

on the cleaner may cause a personal injury or

damage to the objects around the cleaner.

1. HIGH/LOW

button

2. OFF button

1. Star mark

1. Red part

2. Button

3. Battery

cartridge

1 2 3 4 5 6 7 8 9 ... 27 28

Comments to this Manuals

No comments

Makita DVC350 Instruction Manual Page 4

Comments to this Manuals

Related products and manuals for Vacuum cleaners Makita DVC350