Makita DVC350 Instruction Manual download pdf (Page 5)

Installing dust bag

011113

Hold the square section of the dust bag joint and fit the

pins inside the dust bag joint to the notches in the dust

outlet of the cleaner and then insert and turn it clockwise

all the way until it stops.

011114

At this time, make sure that the fastener part on the dust

bag faces upward.

NOTE:

• When the dust bag joint and the ring inside the

dust bag come off, install as follows.

(1) Align the dust bag joint with the seam of the

dust bag and install it so that its protrusion

faces upward.

011115

(2) Tighten the ring inside the dust bag firmly so

that the pins and the ring are positioned as

shown in the figure.

011116

Installing the shoulder strap

011117

Attach one end hook of the shoulder strap onto the ring

in the front of the cleaner and thrust the other end of the

strap through the band of the dust bag and then attach

the other end hook as shown in the figure.

Adjusting the shoulder strap

011118

To adjust the length of the shoulder strap, pull it out to

your desired length and pull the strap in the direction of

arrow as shown in the figure.

Connecting the hose

CAUTION:

• Do not force the hose to bend it and/or stamp it.

Forcing and/or stamping the hose may cause

deformation or damage to the hose.

1. Pull out

2. For shortening

3. For extending

1. Shoulder strap

2. Two hooks

1. Pins

2. Ring

1. Protrusion

1. Hook

1. Dust outlet

2. Dust bag joint

3. Pins

4. Dust bag

1 2 3 4 5 6 7 8 9 10 ... 27 28

Comments to this Manuals

No comments

Makita DVC350 Instruction Manual Page 5

Comments to this Manuals

Related products and manuals for Vacuum cleaners Makita DVC350