Makita HM1810 Specifications download pdf (Page 1)

SPECIFICATIONS

GENERAL POWER TOOL SAFETY WARNINGS

Makita HM1810 Electric Breaker

Supplied by Centenary Hire. Ph: (07) 3375 5068

Blows per minute: 1,100

Joules: 63

Net weight: 30kg

Overall length: 824mm

Intended Use

The tool is intended for heavy chiselling and demolition work as well as

for driving and compacting with appropriate accessories.

Power Supply

The tool should be connected only to a power supply of the same

voltage as indicated on the nameplate, and can only be operated on

single-phase AC supply. They are double-insulated in accordance with

European Standard and can, therefore, also be used from sockets

without an earth wire.

For public low-voltage distribution systems between 220V – 240V

Switching operations of electric apparatus cause voltage fluctuations.

The operation of this device under unfavourable mains conditions can

have adverse effects to the operation of other equipment. With a mains

impedance equal or less than 0.31 Ohms it can be presumed that

there will be no negative effects. The mains socket used for this device

must be protected with a fuse or protective circuit breaker having slow

tripping characteristics.

Noise

A typical A-weighted noise level determined according to EN60745:

Sound pressure level (LpA): 84dB(A)

Sound power level (LWA): 104dB (A)

Uncertainty (K): 2.30dB(A)

WEAR EAR PROTECTION

Vibration

The vibration total value (tri-axial vector sum) determined according to

EN60745:

Work mode: chiselling

Vibration emission (ah,CHeq): 9.0m/s

Uncertainty(K): 1.5m/s

The declared vibration emission value has been measured in

accordance with the standard test method and may be used for

comparing one tools with another.

The declared vibration emission value may also be used in a

preliminary assessment of exposure.

WARNING

The vibration emission during actual use of the power tool can differ

from the declared emission value depending on the ways in which the

tool is used.

Be sure to identify safety measures to protect the operator that are

based on an estimation of exposure in the actual conditions of use

(taking account of all parts pf the operating cycle such as the times

when the tool is switched off and when it is running idle in addition to

the trigger time).

WARNING Read all safety warnings and all instructions.

Failure to follow all instructions listed below may result in electric

shock, fire and/or serious injury. The term “power tool” in all of the

warnings listed below refers to your mains operated (corded) power

tool or battery-operated (cordless) power tool.

Work Area Safety

1. Keep work area clean and well lit. Cluttered and dark areas invite

accidents.

2. Do not operate power tools in explosive atmospheres, such as

in the presence of flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while operating a power

tool. Distractions can cause you to lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never modify the plug

in any way. Do not use any adapter plugs with earthed (grounded)

power tools. Unmodified plugs and matching outlets will reduce risk of

electric shock.

5. Avoid body contact with earthed or grounded surfaces such as

pipes, radiators, ranges and refrigerators. There is an increased

risk of electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet conditions. Water

entering a power tool will increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord for carrying, pulling

or unplugging the power tool. Keep cord away from heat, oil,

sharp edges or moving parts. Electrical safety Damaged or

entangled cords increase the risk of electric shock.

8. When operating a power tool outdoors, use an extension cord

suitable for outdoor use. Use of a cord suitable for outdoor use

reduces the risk of electric shock.

Personal safety

9. Stay alert, watch what you are doing and use common sense

when operating a power tool. Do not use a power tool while

you are tired or under the influence of drugs, alcohol or

medication. A moment of inattention while operating power tools may

result in serious personal injury.

10. Use safety equipment. Always wear eye protection. Safety

equipment such as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions will reduce personal

injuries.

11. Avoid accidental starting. Ensure the switch is in the off-

position before plugging in. Carrying power tools with your finger

on the switch or plugging in power tools that have the switch on invites

accidents.

12. Remove any adjusting key or wrench before turning the power

tool on. A wrench or a key left attached to a rotating part of the

power tool may result in personal injury.

13. Do not overreach. Keep proper footing and balance at all

times. This enables better control of the power tool in unexpected

situations.

14. Dress properly. Do not wear loose clothing or jewellery. Keep

your hair, clothing, and gloves away from moving parts.

Loose clothes, jewellery or long hair can be caught in moving parts.

15. If devices are provided for the connection of dust extraction

and collection facilities, ensure these are connected and properly

used. Use of these devices can reduce dust related hazards.

Power tool use and care

16. Do not force the power tool. Use the correct power tool for

your application. The correct power tool will do the job better and

safer at the rate for which it was designed.

17. Do not use the power tool if the switch does not turn it on and

off. Any power tool that cannot be controlled with the switch is

dangerous and must be repaired.

18. Disconnect the plug from the power source and/or the battery

pack from the power tool before making any adjustments,

changing accessories, or storing power tools. Such preventive

safety measures reduce the risk of starting the power tool accidentally.

19. Store idle power tools out of the reach of children and do not

allow persons unfamiliar with the power tool or these instructions

to operate the power tool. Power tools are dangerous in the hands of

untrained users.

20. Maintain power tools. Check for misalignment or binding of

moving parts, breakage of parts and any other condition that

may affect the power tools operation. If damaged, have the power

tool repaired before use. Many accidents are caused by poorly

maintained power tools.

21. Keep cutting tools sharp and clean. Properly maintained cutting

tools with sharp cutting edges are less likely to bind and are easier to

control.

1 2

SPECIFICATIONS 1

Summary of Contents

Page 1 - SPECIFICATIONS

SPECIFICATIONS GENERAL POWER TOOL SAFETY WARNINGS Makita HM1810 Electric Breaker Supplied by Centenary Hire. Ph: (07) 3375 5068 Blows per minute:

Page 2

SPECIFIC SAFETY RULES FUNCTIONAL DESCRIPTION ASSEMBLY OPERATION 22. Use the power tool, accessories and tool bits etc. in accordance with these instru

Comments to this Manuals

No comments

Makita HM1810 Specifications Page 1

Browse online or download Specifications for Rotary hammers Makita HM1810. Makita HM1810 Specifications User Manual

Summary of Contents

Comments to this Manuals

Makita HM1810 Specifications Page 1

Browse online or download Specifications for Rotary hammers Makita HM1810. Makita HM1810 Specifications User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Rotary hammers Makita HM1810