Makita EK7651HD Use and Care Manual download pdf (Page 19)

Cleaning/changing the air lter

If the air lter becomes clogged, it may cause poor engine •

performance. Therefore, every time after using the Power

Cutter, be sure to clean the air lter in the following way.

Turn the cover lock to the left and remove it.•

Remove the top cover after blowing off dust from it.•

Next, remove the prelter.•

Remove the four star-shaped screws.•

Remove the lter cover.•

Remove the air lter.•

Remove the dust bag lter from the lter cover and gently tap •

and blow on it to clean.

Gently tap and blow on the inner lter to remove dirt and dust. •

Also, periodically wash the inner lter in soapy water and dry

thoroughly.

To clean the air lter tap it gently. If an air compressor is to be •

used, blow the compressed air onto the inside of the air lter.

Do not wash the air lter.

Blow off dust from around the lters.•

Reassemble the air lter to lter cover once cleaning is •

nished.

Tighten the cover lock rmly.•

Cover lock

Loosen

Top cover

Prelter

Star-shaped

screws

Filter cover

Star-shaped

screws

Dust bag lter

Air lter

Inner lter

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

No comments

Makita EK7651HD Use and Care Manual Page 19