Makita JN1600 Instruction Manual

MODEL JN1600 Max. cutting capacities Mild steel Stainless 1.6mm 1.2" (1116") (3164") INSTRUCTION MANUAL Min. cutting radius Continuo

MA( 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 NE 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 - P H. Screw M4x35 (With Warher

MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted t

I M PO R TAN T SAFETY I NST R UCT IO NS WARNING: When using electric tools, basic safety precautions should always be followed to reduce the risk o

of moving parts, breakage of parts, mounting, and other conditions that may affect its operation. A guard or other part that is damaged should be

How to use 0 Before cutting with the nibbler Coat the cutting line with machine oil when cutting mild steel or stainless; use light oil when cutting

0 Cutting method Smooth cutting is achieved by holding the tool perpendicular to the material and moving it gently in the cutting direc- tion. A

0 Blade replacement To replace the blade, use the hex wrench provided to loosen the hold-down screw and remove the die. Then, use the wrench to turn

Maintenance 0 Carbon brushes Replace carbon brushes when they wear down to about 3 mm (1/8") or spark- ing will occur. Both brushes s

OPTIONAL ACCESSORlES CAUTION: The use of any other accessories not specified in this manual might be hazaroous. Die Part No. 725004-8 Punch Part No. 7

NIBBLER Model JNI 600 9