Makita 5007NB Instruction Manual

A B Circular Saw 185 mm (7-1/4") MODEL 5007NB INSTRUCTION MANUAL Specifications Max. cutting depth diameter 5,800 295 mm (7-1 14") (1 -314&

Maintenance 0 Replacing carbon brushes Replace carbon brushes when they wear down to about 6 mm (1/4") of spark- ing will occur. Both brushes

Apr -09'84 US 185 mm (7-1/4') CIRCULAR SAW Model 5007NB Note: The switch and other part configurations may differ from country to country.

/!M MODEL 5007NB NO. USED MACHINE ~ MACHINE 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 ~ 1 1 1 1 1 1

IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE R

14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15

VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified on

9. Guard Against Kickback. Kickback occurs when the saw stalls rapidly and is driven back towards the operator. Release switch immediately if blade bi

15. Place the wider portion of the saw base on that part of the workpiece which is solidly supported, not on the section that will fall off when the c

How to use 0 Switch action To start the tool, simply pull the trigger. Release the trigger to stop. Trigger switch Fig. 4 CAUTION : First, unplug the

0 Blade installation Blade installation is performed by revers- ing the blade removal procedure. a. Install inner flange on shaft. b. Install blade.

0 For the cutting position Use the right notch of the front base for straight cuts. The left notch is for bevel cuts. Align the slot (saw posi