Makita 6405 Instruction Manual download pdf (Page 5)

Installing

Removing Drill Bit

CAUTION

Always be sure that the tool

switched off and unplugged before installing or removing

the bit.

To install the bit, place the bit in the chuck

far

will

go.

Tighten the chuck by

hand.

Place

the chuck key in each of the

three holes and tighten clockwise.

sure

to tighten

all

three chuck holes evenly.

To remove the bit, place the chuck key in

one hole only and turn

counterclockwise.

Then loosen the chuck by hand.

After using the chuck key, remember to

return

to the chuck key holder.

Switch action

Tool

speed

increased by increasing pres-

sure on the trigger. To start the tool, simply

pull the trigger.

Release

the trigger to stop.

For continuous operation, pull the trigger

and then push in the lock button. To stop

the tool from the locked position, pull the

trigger fully, then release

it.

Reversing Switch Action

The Reversing Switch changes the direction

of rotation.

Move the reversing switch lever to the

"FWD"

position for clockwise rotation.

Move the reversing switch lever to the

"REV"

position for counterclockwise rota-

tion.

The switch trigger does not actuate if the

reversing switch lever

in the neutral posi-

tion.

NEUTRAL

/+Reversing

lever

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Makita 6405 Instruction Manual Page 5

Comments to this Manuals

Related products and manuals for Power tools Makita 6405