Makita 6337D User Manual

Models No. DescriptionPRODUCTCONCEPT AND MAIN APPLICATIONS SpecificationStandard equipmentOptional accessories< Note > The standard equipment f

RepairP 10 / 13 < 6 > Assembling speed change lever 1. Before assembling, make sure that 2 compression springs are installed in the spe

Pan head screw M4 x 22 : 1 pc.Tapping screw bindPT 3x16 : 9 pcs.RepairP 11 / 13 4. Assemble compression spring 2 to lock lever as illustrated in Fig.

RepairP 12 / 13< 8 > Assembling drill chuck See Fig. 8. 1. Firmly hold No.1R139 "Drill chuck extractor" with vise. And lock

Circuit diagramWiring diagramP 13 / 13 Color index of lead wiresBlackRedEndbell completeBattery holderSwitchM1 M2BBSwitchBattery holderEndbellArmature

P 2 / 13Features and benefitsChange Lever forDrill/ Screwdriver ModeNew Gear AssemblyPrevents gears from falling out of place.Prevents clutch from act

P 3 / 13Comparison of productsModel No.SpecificationNet weight (with battery): kg [lbs]No load speed( rpm=min -1 )HighLowDimensionsLength(mm [inch])Wi

P 4 / 13Comparison of productsTest 1: Drilled holes in 38mm (1-1/2") thick Spruce; with 7/8" Spade bit ; on High speed drill mod

P 5 / 13Time Required for Driving a Screw/Drilling a HoleThe Number of Screws Driven/Holes Drilled on a Single Full-ChargeTest 2: Drove 1/4" x 3&

P 6 / 13Test 3: Drilled holes in 38mm (1-1/2") thick Spruce; with 1" Auger bit ; on Low speed drill mode.Time Required for Dri

P 7 / 13Hint on setting torqueThe graph below shows the relation between the torque-setting number on adjusting ring and fastening torque(= declutchin

RepairP 8 / 13 < 1 > Disassembling of drill chuck See Fig. 1. For replacing gear assembly, drill chuck has to be disassembled.

RepairP 9 / 13< 5 > Assembling change ring When separating gear assembly from housing, change ring can easily slip off from gear assemb