Makita 5277NB User Manual download pdf (Page 12)

Rip fence (Guide rule) - optional accessory

The handy rip fence allows you to do extra-accurate straight

cuts. Simply slide the rip fence up snugly against the side of

the workpiece and secure it in position with the screw on the

front of the base. It also makes repeated cuts of uniform

width possible.

MAINTENANCE

CAUTION:

• Always be sure that the tool is switched off and

unplugged before attempting to perform inspection or

maintenance.

Replacing carbon brushes

Remove and check the carbon brushes regularly. Replace

when they wear down to the limit mark. Keep the carbon

brushes clean and free to slip in the holders. Both carbon

brushes should be replaced at the same time. Use only iden-

tical carbon brushes.

Use a screwdriver to remove the brush holder caps. Take out

the worn carbon brushes, insert the new ones and secure

the brush holder caps.

CAUTION:

• Never remove the breather from the gear housing. It is

not an oil cap.

To maintain product SAFETY and RELIABILITY, repairs, any

other maintenance or adjustment should be performed by

Makita Authorized or Factory Service Centers, always using

Makita replacement parts.

1. Rip fence (Guide rule )

003633

1. Limit mark

001145

1. Brush holder cap

2. Screwdriver

001521

1. Breather

2. Gear housing

001528

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Makita 5277NB User Manual Page 12