Makita 4351CTJ Datasheet download pdf (Page 4)

USD201-2

Symbols

The followings show the symbols used for tool.

･ volts

･ amperes

･ hertz

･ alternating current

･ no load speed

･ Class II Construction

･ revolutions or reciprocation per minute

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on

the tool.

Selecting the cutting action

008030

This tool can be operated with an orbital or a straight line

(up and down) cutting action. The orbital cutting action

thrusts the blade forward on the cutting stroke and

greatly increases cutting speed.

To change the cutting action, just turn the cutting action

changing lever to the desired cutting action position.

Refer to the table to select the appropriate cutting action.

Position Cutting action Applications

For cutting mild steel,

stainless steel and plastics.

For clean cuts in wood

and plywood.

Small orbit

cutting action

For cutting mild steel,

aluminum and hard wood.

For cutting wood and

plywood.

For fast cutting in

aluminum and mild steel.

Large orbit

cutting action

For fast cutting in

wood and plywood.

Straight line

cutting action

Medium orbit

cutting action

006376

Switch action

008031

CAUTION:

• Before plugging in the tool, always be sure that the

tool is switched off.

To start the tool, slide the switch lever to the "I" position.

To stop the tool, slide the switch lever to the "O" position.

Speed adjusting dial

For 4351CT, 4351FCT

008032

The tool speed can be infinitely adjusted between 800

and 2,800 strokes per minute by turning the adjusting

dial. Higher speed is obtained when the dial is turned in

the direction of number 5; lower speed is obtained when

it is turned in the direction of number 1.

Refer to the table to select the proper speed for the

workpiece to be cut. However, the appropriate speed

may differ with the type or thickness of the workpiece. In

general, higher speeds will allow you to cut workpieces

1. Speed adjusting

dial

1. Switch lever

1. Cutting action

changing lever

1 2 3 4 5 6 7 8 9 ... 27 28

Comments to this Manuals

No comments

Makita 4351CTJ Datasheet Page 4

Comments to this Manuals

Related products and manuals for Power jigsaws Makita 4351CTJ