Makita DHP458 User Manual download pdf (Page 5)

ENGLISH (Original instructions)

Explanation of general view

SPECIFICATIONS

• Due to our continuing program of research and development, the specifications herein are subject to change without

notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

Intended use

ENE079-1

The tool is intended for impact drilling in brick, concrete

and stone. It is also suitable for screw driving and drilling

without impact in wood, metal, ceramic and plastic.

General Power Tool Safety

Warnings GEA010-1

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

CORDLESS HAMMER DRIVER

DRILL SAFETY WARNINGS

GEB056-4

1. Wear ear protectors with impact drilling. Exposure

to noise can cause hearing loss.

2. Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

3. Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring. Cutting

accessory contacting a “live” wire may make exposed

metal parts of the power tool “live” and could give the

operator an electric shock.

4. Hold power tool by insulated gripping surfaces,

when performing an operation where the fastener

may contact hidden wiring. Fasteners contacting a

“live” wire may make exposed metal parts of the

power tool “live” and could give the operator an

electric shock.

5. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

6. Hold the tool firmly.

7. Keep hands away from rotating parts.

8. Do not leave the tool running. Operate the tool

only when hand-held.

9. Do not touch the bit or the workpiece immediately

after operation; they may be extremely hot and

could burn your skin.

1. Red indicator

2. Button

3. Battery cartridge

4. Star marking

5. Switch trigger

6. Lamp

7. Reversing switch lever

8. Speed change lever

9. Action mode changing ring

10. Arrow

11. Adjusting ring

12. Graduation

13. LED indicator

14. Groove

15. Protrusion

16. Steel band

17. Grip base

18. Side grip

19. Sleeve

20. Bit holder

21. Bit

22. Depth rod

23. Clamp screw

24. Hook

25. Screw

26. Blow-out bulb

27. Limit mark

28. Rear cover

29. Screws

30. Arm

31. Spring

32. Recessed part

33. Carbon brush cap

34. Hole

Model DHP448 DHP458

Capacities

Drilling into concrete 14 mm 16 mm

Drilling into steel 13 mm 13 mm

Drilling into wood 65 mm 76 mm

Fastening wood screw 8 mm x 75 mm 10 mm x 90 mm

Fastening machine screw 6 mm

No load speed

High (2) 0 - 1,800 min

-1

0 - 2,000 min

-1

Low (1) 0 - 350 min

-1

0 - 400 min

-1

Blows per minute

High (2) 0 - 27,000 min

-1

0 - 30,000 min

-1

Low (1) 0 - 5,200 min

-1

0 - 6,000 min

-1

Overall length 225 mm

Net weight 2.2 kg 2.3 kg

Rated voltage D.C. 14.4 V D.C. 18 V

1 2 3 4 5 6 ... 64

Comments to this Manuals

No comments

Makita DHP458 User Manual Page 5

Comments to this Manuals

Related products and manuals for Power drills Makita DHP458