Makita 6410 Specifications download pdf (Page 4)

USE PROPER EXTENSION CORD: Make sure your extension cord is in good condition.

When using an extension cord, be sure to use one heavy enough to carry the current your

product will draw. An undersized cord will cause a drop in line voltage resulting in loss of

power and overheating. Table 1 shows the correct size to use depending on cord length and

nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage num-

ber, the heavier the cord.

SPECIFIC SAFETY RULES

USB001-2

DO NOT let comfort or familiarity with product (gained from

repeated use) replace strict adherence to drill safety rules. If

you use this tool unsafely or incorrectly, you can suffer serious

personal injury.

Hold tool by insulated gripping surfaces

when performing an operation where the

cutting tools may contact hidden wiring or

its own cord. Contact with a “live” wire

will make exposed metal parts of the tool

“live” and shock the operator.

Always be sure you have a firm footing.

Be sure no one is below when using the

tool in high locations.

Hold the tool firmly.

Keep hands away from rotating parts.

Do not leave the tool running. Operate the

tool only when hand-held.

Do not touch the drill bit or the workpiece

immediately after operation; they may be

extremely hot and could burn your skin.

Some material contains chemicals which

may be toxic. Take caution to prevent dust

inhalation and skin contact. Follow mate-

rial supplier safety data.

SAVE THESE INSTRUCTIONS

WARNING:

MISUSE or failure to follow the safety rules stated in this

instruction manual may cause serious personal injury.

Table 1: Minimum gage for cord

Ampere Rating

Volts Total length of cord in feet

120 V 25 ft. 50 ft. 100 ft. 150 ft.

More Than Not More Than AWG

0 6 18 16 16 14

6 10 18161412

10 12 16 16 14 12

12 16 14 12 Not Recommended

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Makita 6410 Specifications Page 4

Comments to this Manuals

Related products and manuals for Power drills Makita 6410