Makita 6096D User Manual download pdf (Page 5)

CAUTION:

• Pressing excessively on the tool will not speed up the

drilling. In fact, this excessive pressure will only serve

to damage the tip of your bit, decrease the tool perfor-

mance and shorten the service life of the tool.

• There is a tremendous force exerted on the tool/bit at

the time of hole breakthrough. Hold the tool firmly and

exert care when the bit begins to break through the

workpiece.

• A stuck bit can be removed simply by setting the

reversing switch to reverse rotation in order to back out.

However, the tool may back out abruptly if you do not

hold it firmly.

• Always secure small workpieces in a vise or similar

hold-down device.

• If the tool is operated continuously until the battery car-

tridge has discharged, allow the tool to rest for 15 min-

utes before proceeding with a fresh battery.

Drilling and driving performance

The following reference table indicates the approximate drilling and driving capacities from a single battery charge. It

may differ under some conditions.

(*...350 tr/mn)

MAINTENANCE

CAUTION:

Always be sure that the tool is switched off and the bat-

tery cartridge is removed before carrying out any work on

the tool.

To maintain product safety and reliability, repairs, mainte-

nance or adjustment should be carried out by a

Makita Authorized Service Center.

ACCESSORIES

CAUTION:

These accessories or attachments are recommended for

use with your Makita tool specified in this manual. The

use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory or

attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita service center.

• Phillips bit

• Slotted bit

• Soket bit

• Drill bit for steel

• Drill bit for wood

• Rubber pad assembly

• Foam polishing pad 125

• Wool bonnet 100

• Battery cover

• Various type of Makita genuine batteries and chargers

Application

Dimensions

of hole

Workpiece Thickness

No. holes

Battery 9000 Battery 9033

Metal

3mm

Cold-rolled steel

sheet or plate

1.6 mm

230 380

6.5 mm 50 80

3mm

Aluminun sheet 1.6 mm

750 1,250

10 mm 120 200

Wood

9mm

Medium hard wood 25 mm

350 590

*15 mm 100 160

*18 mm 60 100

Application

Dimensions of

wood screw

Workpiece

Fastenings

Battery 9000 Battery 9033

Wood screws

3.5 mm x 20 mm

Medium hard wood

500 screws 850 screws

4.5 mm x 20 mm 400 screws 650 screws

*5.1 mm x 35 mm 90 screws 150 screws

*5.5 mm x 50 mm 60 screws 100 screws

1 2 3 4 5 6 7 8 9 10 ... 51 52

Comments to this Manuals

No comments

Makita 6096D User Manual Page 5

Comments to this Manuals

Related products and manuals for Power drills Makita 6096D