Makita AN621 User Manual download pdf (Page 4)

ENGLISH

Explanation of general view

3-1. Pneumatic tool oil

4-1. Adjuster

5-1. Change lever

5-2. Plastic collated coil

5-3. Wire collated coil

6-1. Door

6-2. Magazine cap

6-3. Lever

7-1. Graduation

7-2. Coil support plate

8-1. Slot

8-2. Magnet

8-3. Feeder body

9-1. Air socket

9-2. Air fitting

10-1. Trigger

10-2. Contact element

12-1. Continuous nailing

12-2. Change lever

12-3. Trigger lock

13-1. Exhaust cover

14-1. Small rod

14-2. Ejection port

15-1. Hook

18-1. Change lever

18-2. Trigger lock

19-1. Cap

22-1. Magnet

23-1. Drain cock

24-1. Air filter

25-1. Oiler

25-2. Pneumatic oil

SPECIFICATIONS

Model AN621

Air pressure 0.44 - 0.83 Mpa (4.4 - 8.3 bar)

Wire welded nails 45 mm - 65 mm

Applicable length

Plastic sheet collated nails 50 mm - 65 mm

Nail capacity 200 - 300 pcs.

Min. hose diameter 6.5 mm

Pneumatic tool oil Turbine oil

Dimensions (L X H X W) 310 mm X 305 mm X 133 mm

Net weight 2.8 kg

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Note: Specifications may differ from country to country.

END105-1

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ Wear safety glasses.

ENE059-1

Intended use

The tool is intended for the preliminary interior work such

as fixing floor joists or common rafters and framing work

in 2 “x 4” housing.

ENG046-1

For European countries only

Noise and Vibration

The typical A-weighted noise levels are

sound pressure level: 86 dB (A)

sound power level: 99 dB (A).

Wear ear protection.

The typical weighted root mean square acceleration

value is 6 m/s

These values have been obtained according to EN792.

ENH013-7

EC-DECLARATION OF CONFORMITY

Model; AN621

We declare under our sole responsibility that this

product is in compliance with the following standards of

standardized documents;

EN792 in accordance with Council Directives, 98/37/EC.

CE2008

000230

Tomoyasu Kato

Director

Responsible Manufacturer:

Makita Corporation

3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN

Authorized Representative in Europe:

Makita International Europe Ltd.

Michigan Drive, Tongwell, Milton Keynes, Bucks MK15

8JD, ENGLAND

ENB067-2

IMPORTANT SAFETY

INSTRUCTIONS

WARNING: WHEN USING THIS TOOL, BASIC

SAFETY PRECAUTIONS SHOULD ALWAYS BE

FOLLOWED TO REDUCE THE RISK OF PERSONAL

INJURY, INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS.

• For personal safety and proper operation and

maintenance of the tool, read this instruction

manual before using the tool.

1 2 3 4 5 6 7 8 9 ... 59 60

Comments to this Manuals

No comments

Makita AN621 User Manual Page 4

Comments to this Manuals

Related products and manuals for Nail Gun Makita AN621