Makita UH6580 Instruction Manual download pdf (Page 10)

Adjust the crank position as shown in the figure. At this

time, apply some grease provided with new shear

blades to the periphery of the crank.

Fig.25

Overlap the oval hole in the upper blade with that in the

lower one.

Fig.26

Take out the blade cover from the old shear blades and

fit it onto the new ones for easy handling during the

replacement of blades.

Fig.27

Place the new shear blades on the tool so that the oval

holes in the shear blades fit onto the crank. Overlap the

holes in the shear blades with the screw holes in the tool

and then secure them with two screws.

Fig.28

Check the crank for smooth turn with a slotted bit

screwdriver.

Fig.29

Install the gear housing, under cover on the tool. Tighten

the screw firmly.

Remove the blade cover and then turn on the tool to

check it for proper movement.

NOTE:

• When the shear blades does not operate properly,

there is a poor fit between the blades and crank.

Redo from the beginning.

Storage

The hook hole in the bottom of the blade cover is

convenient for hanging the tool from a nail or screw on

the wall.

Fig.30

Put the blade cover on the shear blades so that the

blades are not exposed. Store the tool out of the reach of

children carefully.

Store the tool in the place not exposed to water and rain.

To maintain product SAFETY and RELIABILITY, repairs,

carbon brush inspection and replacement, any other

maintenance or adjustment should be performed by

Makita Authorized Service Centers, always using Makita

replacement parts.

ACCESSORIES

CAUTION:

• These accessories or attachments are

recommended for use with your Makita tool

specified in this manual. The use of any other

accessories or attachments might present a risk of

injury to persons. Only use accessory or

attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita Service Center.

• Blade cover

• Hook complete

• Shear blade assembly

• Waist cord hook

• Arm cord hook

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 55 56

Comments to this Manuals

No comments

Makita UH6580 Instruction Manual Page 10

Comments to this Manuals

Related products and manuals for Grass trimmers Makita UH6580