Makita JN1601 User Manual download pdf (Page 4)

ENH101-15

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Nibbler

Model No./ Type: JN1601

are of series production and

Conforms to the following European Directives:

2006/42/EC

And are manufactured in accordance with the following

standards or standardised documents:

EN60745

The technical documentation is kept by our authorised

representative in Europe who is:

Makita International Europe Ltd.

Michigan Drive, Tongwell,

Milton Keynes, Bucks MK15 8JD, England

30.1.2009

000230

Tomoyasu Kato

Director

Makita Corporation

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, 446-8502, JAPAN

GEA010-1

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for

future reference.

GEB028-2

NIBBLER SAFETY WARNINGS

1. Hold the tool firmly.

2. Secure the workpiece firmly.

3. Keep hands away from moving parts.

4. Edges and chips of the workpiece are sharp.

Wear gloves. It is also recommended that you

put on thickly bottomed shoes to prevent

injury.

5. Do not put the tool on the chips of the

workpiece. Otherwise it can cause damage

and trouble on the tool.

6. Do not leave the tool running. Operate the tool

only when hand-held.

7. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

8. Do not touch the punch, die or the workpiece

immediately after operation; they may be

extremely hot and could burn your skin.

9. Avoid cutting electrical wires. It can cause

serious accident by electric shock.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this

instruction manual may cause serious personal

injury.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on

the tool.

Changing the die position

Fig.1

The die position can be changed 360°. To change it,

proceed as follows.

1. Loosen the lock nut with the wrench provided.

2. Pull the die holder slightly and turn it to the desired

position for operation.

3. Tighten the lock nut to secure the die holder in the

desired position.

There are four positive stops at 90° each: 0°, 90° left and

right and 180°. To position the die to any of these positive

stops:

1. Loosen the lock nut with the wrench provided.

2. Pull the die holder slightly and depress lightly while

turning it to the desired position. The die holder will

lock into one of the positive stop positions as

desired.

3. Turn the die holder slightly to make sure that it is

positively locked into position.

4. Tighten the lock nut to secure the die holder.

Permissible cutting thickness

Fig.2

The thickness of material to be cut depends upon the

tensile strength of the material itself. The groove on the

die holder acts as a thickness gauge for allowable cutting

thickness. Do not attempt to cut any material which will

not fit into this groove.

Cutting line

The notch in the die holder indicates your cutting line. Its

width is equal to the cutting width. Align the notch to the

cutting line on the workpiece when cutting.

1 2 3 4 5 6 7 8 9 ... 35 36

Comments to this Manuals

No comments

Makita JN1601 User Manual Page 4

Comments to this Manuals

Related products and manuals for Power tools Makita JN1601