Makita AD02ZW Use and Care Manual download pdf (Page 6)

For model AD02

013260

CAUTION:

• Do not look in the light or see the source of light

directly.

Pull the switch trigger to light up the lamp. The lamp

keeps on lighting while the switch trigger is being pulled.

The lamp goes out just after the switch trigger is

released.

NOTE:

• Use a dry cloth to wipe the dirt off the lens of lamp.

Be careful not to scratch the lens of lamp, or it

may lower the illumination.

Reversing switch action

013255

This tool has a reversing switch to change the direction

of rotation. Depress the reversing switch lever from the

A side for clockwise rotation or from the B side for

counterclockwise rotation.

When the reversing switch lever is in the neutral

position, the switch trigger cannot be pulled.

CAUTION:

• Always check the direction of rotation before

operation.

• Use the reversing switch only after the tool comes

to a complete stop. Changing the direction of

rotation before the tool stops may damage the tool.

• When not operating the tool, always set the

reversing switch lever to the neutral position.

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before carrying out

any work on the tool.

Installing or removing drill bit

For model AD01

013252

To install the bit, place it in the chuck as far as it will go.

Tighten the chuck by hand. Place the chuck key in each

of the three holes and tighten clockwise. Be sure to

tighten all three chuck holes evenly.

To remove the bit, turn the chuck key counterclockwise

in just one hole, then loosen the chuck by hand.

After use, return the chuck key to the storage cavity on

the tool.

For model AD02

013261

Hold the tool firmly and turn the sleeve

counterclockwise to open the chuck jaws. Place the bit

in the chuck as far as it will go. Hold the tool firmly turn

the sleeve clockwise to tighten the chuck.

To remove the bit, hold the tool firmly turn the sleeve

counterclockwise.

1. Sleeve

1. Chuck key

1. Reversing

switch

1. Lamp

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Comments to this Manuals

No comments

Makita AD02ZW Use and Care Manual Page 6

Comments to this Manuals

Related products and manuals for Power tools Makita AD02ZW