Makita G2800R Owner's Manual download pdf (Page 30)

−

(3) DC APPLICATION

The DC terminal is used only for charging

12 volt batteries. It provides up to 12V-

8.3A (100W) of maximum power.

CONNECTION OF CABLE :

■

Connect positive (red) terminal on

generator to positive (+) terminal on

battery.

■

Connect negative (black) terminal on

generator to negative (

) terminal on

battery.

■

Both AC and DC output can be used

at the same time if the total output is

within rated output of the generator.

RED

(+)

BLACK

(

)

(+)

(

)

SAFETY PRECAUTIONS WHILE CHARGING

■

An explosive hydrogen gas is discharged through vent holes in the battery dur-

ing the charging process. Do not allow spark or open flame around the genera-

tor or battery during the charging process.

■

Electrolyte fluid can burn eyes and clothing. Be extremely careful to avoid con-

tact. If injured, wash the affected area immediately with large quantities of

water and consult a doctor for treatment.

■

When charging a large capacity battery or totally discharged battery, excessive

current may force the DC breaker to turn off.

In such cases, use a battery charger to charge a large battery with AC output.

■

Battery defects may cause the DC breaker to turn off.

Check the battery before replacing the DC breaker.

G28R-G61R 米国取説GU2016 05.1.26 11:14 AM ページ20

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 48 49

Comments to this Manuals

No comments

Makita G2800R Owner's Manual Page 30

Comments to this Manuals

Related products and manuals for Power generators Makita G2800R