Makita DA330D Instruction Manual download pdf (Page 2)

ENGLISH (Original instructions)

SPECIFICATIONS

Model DA330D DA331D

Steel 10 mm 10 mm

Capacities

Wood 12 mm 12 mm

No load speed (min

-1

) 0 - 800 0 - 800

Overall length 298 mm 310 mm

Net weight 1.1 kg 1.1 kg

Rated voltage D.C. 10.8 V D.C. 10.8 V

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

END004-4

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ Only for EU countries

Do not dispose of electric equipment or

battery pack together with household

waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment, 2006/66/EC on

batteries and accumulators and waste

batteries and accumulators and their

implementation in accordance with

national laws, electric equipment and

battery pack that have reached the end

of their life must be collected separately

and returned to an environmentally

compatible recycling facility.

ENE032-1

Intended use

The tool is intended for drilling in wood, metal and

plastic.

ENG905-1

Noise

The typical A-weighted noise level determined

according to EN60745:

Sound pressure level (L

) : 70 dB(A) or less

Uncertainty (K) : 3 dB(A)

The noise level under working may exceed 80 dB(A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode: drilling into metal

Vibration emission (a

h,D

) : 2.5 m/s

or less

Uncertainty (K) : 1.5 m/s

ENG901-1

•

The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-16

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Cordless Angle Drill

Model No./ Type: DA330D, DA331D

are of series production and

Conforms to the following European Directives:

2006/42/EC

Ni-MH

Li-ion

1 2 3 4 5 6 7 ... 11 12

Comments to this Manuals

No comments

Makita DA330D Instruction Manual Page 2

Comments to this Manuals

Related products and manuals for Power drills Makita DA330D