Makita DJV181 Instruction Manual download pdf (Page 7)

Then the tool keeps the speed until the tool is

switched off. When temperature is low and there is

less fluidity in grease, the tool may not have this

function even with the motor rotating.

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before carrying out

any work on the tool.

Installing or removing saw blade

CAUTION:

• Always clean out all chips or foreign matter

adhering to the blade and/or blade holder. Failure

to do so may cause insufficient tightening of the

blade, resulting in a serious personal injury.

• Do not touch the blade or the workpiece

immediately after operation; they may be

extremely hot and could burn your skin.

• Tighten the saw blade securely. Failure to do so

may cause a serious injury.

• When you remove the saw blade, be careful not to

hurt your fingers with the top of the blade or the

tips of workpiece.

013992

Before installing the blade, make sure that the blade

holder is in the released position.

To install the blade, insert the blade (teeth facing

forward) into the blade holder until it latches. The blade

holder moves to the fixed position by itself and the blade

is locked. Pull the blade lightly to make sure that the

blade does not fall off during operation.

CAUTION:

• Do not open the tool opener excessively, or it may

cause tool damage.

013929

To remove the blade, push the tool opener forward as

far as it will go. This allows the blade to be released.

NOTE:

• Occasionally lubricate the roller.

Hex wrench storage

013930

When not in use, store the hex wrench as shown in the

figure to keep it from being lost.

Cover plate

013876

Use the cover plate when cutting decorative veneers,

plastics, etc. It protects sensitive or delicate surfaces

from damage. Fit it on the back of the tool base.

1. Cover plate

2. Base

1. Base

2. Hex wrench

1. Jig saw blade

1. Fixed position

2. Released position

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Comments to this Manuals

No comments

Makita DJV181 Instruction Manual Page 7

Comments to this Manuals

Related products and manuals for Cordless jigsaws Makita DJV181