Makita DJV181 Instruction Manual download pdf (Page 10)

Metal cutting

Always use a suitable coolant (cutting oil) when cutting

metal. Failure to do so will cause significant blade wear.

The underside of the workpiece can be greased instead

of using a coolant.

Rip fence set (optional accessory)

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before installing or

removing accessories.

1. Straight cuts

013938

When repeatedly cutting widths of 160 mm (6-5/16") or

less, use of the rip fence will assure fast, clean, straight

cuts.

013939

To install, insert the rip fence into the rectangular hole

on the side of the tool base with the fence guide facing

down. Slide the rip fence to the desired cutting width

position, then tighten the bolt to secure it.

2. Circular cuts

013940

013941

When cutting circles or arcs of 170 mm (6-11/16") or

less in radius, install the rip fence as follows.

1. Insert the rip fence into the rectangular hole on

the side of the base with the fence guide facing

up. Insert the circular guide pin through either of

the two holes on the fence guide. Screw the

threaded knob onto the pin to secure the pin.

2. Now slide the rip fence to the desired cutting

radius, and tighten the bolt to secure it in place.

Then move the base all the way forward.

NOTE:

• Always use blades No. B-17, B-18, B-26 or B-27

when cutting circles or arcs.

MAINTENANCE

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before attempting to

perform inspection or maintenance.

• Never use gasoline, benzine, thinner, alcohol or

the like. Discoloration, deformation or cracks may

result.

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be

performed by Makita Authorized or Factory Service

Centers, always using Makita replacement parts.

1. Fence guide

2. Threaded knob

3. Circular guide pin

1. Hex wrench

2. Bolt

3. Fence guide

1. Rip fence

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Comments to this Manuals

No comments

Makita DJV181 Instruction Manual Page 10

Comments to this Manuals

Related products and manuals for Cordless jigsaws Makita DJV181