Makita BUH650 Instruction Manual download pdf (Page 13)

011260

Check the crank for smooth turn with a slotted bit

screwdriver.

011261

Install the plate, under cover on the tool. Tighten the

screw firmly.

NOTE:

• There is no distinction between the top and bottom

of the plate.

Remove the blade cover and then turn on the tool to

check it for proper movement.

NOTE:

• When the shear blades does not operate properly,

there is a poor fit between the blades and crank.

Redo from the beginning.

Replacing carbon brushes

001145

Remove and check the carbon brushes regularly.

Replace when they wear down to the limit mark. Keep

the carbon brushes clean and free to slip in the holders.

Both carbon brushes should be replaced at the same

time. Use only identical carbon brushes.

011161

Insert the top end of slotted bit screwdriver into the

notch in the tool and remove the holder cap cover by

lifting it up.

011162

Use a screwdriver to remove the brush holder caps.

Tak e o ut t he wo rn car bo n b ru sh es , i ns er t t he n ew o ne s

and secure the brush holder caps.

Reinstall the holder cap cover on the tool.

Storage

The hook hole in the bottom of the blade cover is

convenient for hanging the tool from a nail or screw on

the wall.

011160

Remove the battery cartridge and put the blade cover

on the shear blades so that the blades are not exposed.

Store the tool out of the reach of children carefully.

1. Brush holder

cap

2. Screwdriver

1. Holder cap

cover

2. Screwdriver

1. Limit mark

1. Crank

1. Oval hole of

shear blade

2. Crank

1 2 ... 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Makita BUH650 Instruction Manual Page 13

Comments to this Manuals

Related products and manuals for Cordless hedge trimmers Makita BUH650