Makita BUH650 Instruction Manual download pdf (Page 12)

011158

Remove the plate.

011159

Set the crank at the angle as shown in the figure with a

slotted bit screwdriver.

011256

Remove two screws from the shear blades and the

shear blade unit will be taken out.

011257

CAUTION:

• Return the gear to the original position in such a

manner as it was installed if it should be taken

away by mistake.

Installing the shear blade

Prepare 4 removed screws (For under cover), 2 screws

(For shear blade), plate, under cover, and new shear

blades.

Adjust the crank position as shown in the figure. At this

time, apply some grease provided with new shear

blades to the periphery of the crank.

011258

Overlap the oval hole in the upper blade with that in the

lower one.

011259

Take ou t t he bl ad e c ov er f rom t he ol d s he ar bla de s a nd

fit it onto the new ones for easy handling during the

replacement of blades.

009302

Place the new shear blades on the tool so that the oval

holes in the shear blades fit onto the crank. Overlap the

holes in the shear blades with the screw holes in the

tool and then secure them with two screws.

1. Oval hole of

shear blade

1. Crank

1. Screws

2. Shear blade

1. Crank

1. Plate

1. Under cover

2. Blade cover

1 ... 11 12 13 14 15 16

No comments

Makita BUH650 Instruction Manual Page 12