P 10/ 12
Repair
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Slider section, Tool less Blade Clamp Mechanism
ASSEMBLING
(2) Assemble Toolless mechanism to Slider (Fig.14).
Fig.14
Housing R side
2. Assemble Slider plate to Rod.
Note: Locate the closed end of Slider plate
to right side viewing from the bore side of Rod.
Housing L side
5. Mount Slider guide.
Safety wire side
(Font side)
4. Assemble the Rod to Slider while facing the Bore side of Rod to Armature side.
Bore
Bore
Slider plate
1. Set Poly urethane sponge
seal into Slider plate.
3. Assemble Slider
support.
Armature side
Slider
Pin 4
Stop ring E-3
Note: Blade clamp mechanism (Rod assembly) must be mounted to Slider as per illustrated direction.
Comments to this Manuals