Makita UB1103 Instruction Manual download pdf (Page 4)

USD201-2

Symbols

The followings show the symbols used for tool.

･ volts

･ amperes

･ hertz

･ alternating current

･ no load speed

･ Class II Construction

･ revolutions or reciprocation per minute

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function

on the tool.

Switch action

CAUTION:

• Before plugging in the tool, always check to see

that the switch trigger actuates properly and

returns to the "OFF" position when released.

014256

To start the tool, simply pull the switch trigger. Tool

speed is increased by increasing pressure on the switch

trigger. Release the switch trigger to stop. Switch can be

locked in "ON" position for ease of operator comfort

during extended use. Apply caution when locking tool in

"ON" position and maintain firm grasp on tool.

For continuous operation, pull the switch trigger, push in

the lock button and then release the switch trigger.

To stop the tool from the locked position, pull the switch

trigger fully, then release it.

A speed control screw is provided so that maximum tool

speed can be limited (variable). Turn the speed control

screw clockwise for higher speed, and counterclockwise

for lower speed.

OPERATION

014419

CAUTION:

• Always hold the tool only by the handle when

performing an operation. Do not touch the metal

part.

1. Switch trigger

2. Speed control

screw

3. Higher

4. Lower

5. Lock button

1 2 3 4 5 6 7 8 9 ... 19 20

Comments to this Manuals

No comments

Makita UB1103 Instruction Manual Page 4

Comments to this Manuals

Related products and manuals for Air blowers/dryers Makita UB1103