Makita BTL063 User Manual download pdf (Page 5)

Switch action

CAUTION:

• Before inserting the battery cartridge into the tool,

always check to see that the switch lever actuates

properly and returns to the "OFF" position when

released.

008330

To start the tool, simply pull the switch lever. Tool speed

is increased by increasing pressure on the switch lever.

Release the switch lever to stop.

Electric brake

This tool is equipped with an electric blade brake. If the

tool consistently fails to quickly stop blade after switch

lever release, have tool serviced at a Makita service

center.

Lighting up the front lamp

CAUTION:

• Do not look in the light or see the source of light

directly.

008498

Pull the switch lever to light up the lamp. The lamp

keeps on lighting while the switch lever is being pulled.

The light automatically goes out 10 - 15 seconds after

the switch lever is released.

NOTE:

• Use a dry cloth to wipe the dirt off the lens of lamp.

Be careful not to scratch the lens of lamp, or it may

lower the illumination.

Reversing switch action

008331

This tool has a reversing switch to change the direction

of rotation. Depress the reversing switch lever from the A

side for clockwise rotation or from the B side for

counterclockwise rotation.

When the reversing switch lever is in the neutral position,

the switch lever cannot be pulled.

CAUTION:

• Always check the direction of rotation before

operation.

• Use the reversing switch only after the tool comes

to a complete stop. Changing the direction of

rotation before the tool stops may damage the tool.

• When not operating the tool, always set the

reversing switch lever to the neutral position.

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before carrying out

any work on the tool.

Selecting correct socket

Always use the correct size socket for bolts and nuts. An

incorrect size socket will result in inaccurate and

inconsistent fastening torque and/or damage to the bolt

or nut.

Installing or removing socket

008496

To install the socket, push it onto the anvil of the tool until

it locks into place.

To remove the socket, simply pull it off.

1. Socket

2. Anvil

1. Reversing

switch lever

1. Lamp

1. Switch lever

1 2 3 4 5 6 7 8 9 10 ... 27 28

Comments to this Manuals

No comments

Makita BTL063 User Manual Page 5

Comments to this Manuals

Related products and manuals for Tools Makita BTL063