Makita 6176D User Manual

INSTRUCTION MANUALWARNING:For your personal safety, READ and UNDERSTAND before using.SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.Cordless Driver Dril

10• A stuck bit can be removed simply by setting thereversing switch to reverse rotation in order to back out.However, the tool may back out abruptly

11EN0001-1Recycling the BatteryThe only way to dispose of a Makita battery is to recycle it.The law prohibits any other method of disposal.To recycle

Memo12

13FoldCutStampTimbreMakita Canada Inc.1950 Forbes Street,Whitby, OntarioL1N 7B7

14Your answers to the following questions are appreciated.Date Purchased Model No.Serial No.Initial Last NameStreet AddressCity ProvinceAGE:Male Femal

15Factory Service CentresFor the authorized service centre nearest you please refer to the local yellow pages directory under “tools” or con-tact our

Warranty PolicyEvery Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects fromworkmanship

2SPECIFICATIONS• Manufacturer reserves the right to change specifications without notice.• Specifications may differ from country to country.GENERAL S

3Electrical Safety4. A battery operated tool with integral bat-teries or a separate battery pack must berecharged only with the specified chargerfor t

4Service21. Tool service must be performed only byqualified repair personnel. Service or main-tenance performed by unqualified personnelmay result in

5IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER & BATTERY CARTRIDGEUSC003-11. SAVE THESE INSTRUCTIONS- This man-ual contains important safety and opera

6ADDITIONAL SAFETY RULES FOR CHARGER & TOOL1. The charger and the tool are specificallydesigned to work together. Do not attemptto charge any othe

7FUNCTIONAL DESCRIPTIONCAUTION:• Always be sure that the tool is switched off beforeadjusting or checking function on the tool.ChargingConnect the cha

8Reversing switch actionThis tool has a reversing switch to change the direction ofrotation. Move the reversing switch lever to the “FWD” posi-tion fo

9OPERATIONScrewdriving operationPlace the point of the driver bit in the screw head and applypressure to the tool. Start the tool slowly and then incr