Makita BST221Z Instruction Manual download pdf (Page 5)

Make sure all safety systems are in working order before

operation. The tool must not operate if only the switch

trigger is pulled or if only the safety lever is pressed

against the wood. It must work only when both actions

are performed. Test for possible faulty operation with a

tool unloaded and pointed well away from yourself or

any bystanders.

NOTE:

• There is a possibility that the tool may operate for

an instant when only the trigger is pulled. This does

not indicate a problem. If this occurs, point the tool

well away from yourself or any bystanders.

Release and pull the trigger again to make sure the

safety systems are in working order.

ASSEMBLY

CAUTION:

• Always make sure that your fingers are not placed

on the trigger and the battery cartridge is removed

before carrying out any work on the stapler.

Staples

• Handle the staples and their box carefully. If the

staples have been handled roughly, they may be

bent out of shape, causing poor staple feed or

jamming.

• Avoid storing the staples in a very humid or hot

place or place exposed to direct sunlight.

CAUTION:

• Do not use staples other than designated in this

manual or staples that appear to be damaged, bent,

rusty or corroded.

• Do not insert staples of which size is different each

other at the same time inside the magazine ,

causing poor staple feed or jamming.

Loading staples

Remove the battery cartridge.

Press the locking lever on the rear of the sub magazine

and slide the sub magazine backward.

009152

Load staples into the main magazine with their feet

facing up. Slide the sub-magazine forward.

009153

To secure the sub magazine in place, hook the locking

lever on the rear of the sub-magazine.

CAUTION:

• With the magazine loaded, if the tool is held

downward and the sub-magazine is opened, the

staples can fall out and present a danger to anyone

or anything below. Keep this in mind especially

when working in high locations.

Unloading staples

CAUTION:

• When removing staples, make sure that your

fingers are not placed on the trigger or the lever

and the battery cartridge is removed from the

stapler. Misfiring may cause personal injuries and

property damage.

Remove the battery cartridge.

Press the locking lever and slide the magazine back.

009152

Take out staples from the magazine slit.

009162

1. Sub magazine

2. Locking lever

1. Sub magazine

2. Locking lever

1. Staples

2. Main magazine

1. Sub magazine

2. Locking lever

1 2 3 4 5 6 7 8 9 10 ... 23 24

Comments to this Manuals

No comments

Makita BST221Z Instruction Manual Page 5

Comments to this Manuals