Makita BST221Z Instruction Manual download pdf (Page 2)

ENGLISH

SPECIFICATIONS

Model BST221

Staple width 10 mm (3/8")

Applicable staples length 10 mm (3/8") - 22 mm (7/8")

Staple magazine capacity 84 pcs

Overall length 251 mm (9-7/8")

Net weight 2.3 kg (5.1lbs)

Rated voltage D.C. 18V

Standard battery cartridges BL1830

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Note: Specifications may differ from country to country.

USA003-2

GENERAL SAFETY RULES

(FOR ALL BATTERY OPERATED

TOOLS)

WARNING! Read and understand all instructions.

Failure to follow all instructions listed below, may result

in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS.

Work Area

1. Keep your work area clean and well lit.

Cluttered benches and dark areas invite

accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep bystanders, children, and visitors away

while operating a power tool. Distractions can

cause you to lose control.

Electrical Safety

4. A battery operated tool with integral batteries

or a separate battery pack must be recharged

only with the specified charger for the battery.

A charger that may be suitable for one type of

battery may create a risk of fire when used with

another battery.

5. Use battery operated tool only with

specifically designated battery pack. Use of

any other batteries may create a risk of fire.

Personal Safety

6. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use tool while tired or under the

influence of drugs, alcohol, or medication. A

moment of inattention while operating power tools

may result in serious personal injury.

7. Dress properly. Do not wear loose clothing or

jewelry. Contain long hair. Keep your hair,

clothing, and gloves away from moving parts.

Loose clothes, jewelry, or long hair can be caught

in moving parts.

8. Avoid accidental starting. Be sure switch is in

the locked or off position before inserting

battery pack. Carrying tools with your finger on

the switch or inserting the battery pack into a tool

with the switch on invites accidents.

9. Remove adjusting keys or wrenches before

turning the tool on. A wrench or a key that is left

attached to a rotating part of the tool may result in

personal injury.

10. Do not overreach. Keep proper footing and

balance at all times. Proper footing and balance

enables better control of the tool in unexpected

situations.

11. Use safety equipment. Always wear eye

protection. Dust mask, non-skid safety shoes,

hard hat, or hearing protection must be used for

appropriate conditions.

Tool Use and Care

12. Use clamps or other practical way to secure

and support the workpiece to a stable platform.

Holding the work by hand or against your body is

unstable and may lead to loss of control.

13. Do not force tool. Use the correct tool for your

application. The correct tool will do the job better

and safer at the rate for which it is designed.

14. Do not use tool if switch does not turn it on or

off. Any tool that cannot be controlled with the

switch is dangerous and must be repaired.

15. Disconnect battery pack from tool or place the

switch in the locked or off position before

making any adjustments, changing

accessories, or storing the tool. Such

preventive safety measures reduce the risk of

starting the tool accidentally.

1 2 3 4 5 6 7 ... 23 24

Comments to this Manuals

No comments

Makita BST221Z Instruction Manual Page 2

Comments to this Manuals