Makita UM40LDW Instruction Manual download pdf (Page 11)

WARN

Replace bent or damaged blade immediately.

bent or damaged blade may cause exces-

sive vibration, resulting in damage to the mower or serious injury to operator.

Blade sharpening

Keep the blade sharp and clean

for

best performance.

dull blade does not cut grass

cleanly and evenly. It may overload the motor and waste more battery energy

Secure

screwdriver horizontally in

vice.

Place the center hole in the blade on

screwdriver shank.

If the blade is balanced, it will remain in

horizontal position.

either

the blade drops downward,

sharpen the heavy side until the blade is

balanced.

Turn off the interlock switch and remove

the key.

you are recharging the

mower, stop recharging and disconnect

the charging plug.

Remove the blade as described in

“Installing or removing blade”.

Secure the blade in

vice or the like.

Carefully sharpen the cutting edges

the blade with

file or sharpening stone.

Check the balance of the blade as

described in ”Blade balancing”.

Install the blade and secure it by tighten-

ing the bolt with the wrenches provided.

‘

File

sharpening

store

CAUTION:

*Wear gloves and safety glasses during sharpening

*Make sure the blade remains balanced.

*Sharpen the blade at the original cutting angle.

*Sharpen the cutting edges on both end

blade, removing equal amounts of material

from both ends.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments

Makita UM40LDW Instruction Manual Page 11

Comments to this Manuals

Related products and manuals for Power tools Makita UM40LDW