Makita UC120D Instruction Manual download pdf (Page 2)

ENGLISH (Original instructions)

SPECIFICATIONS

Model UC120D

Chain speed per minute (min

-1

) 160 m/min.

Length of guide bar 115 mm

Type 25 AP

Pitch 1/4"

Saw chain

No. of drive links 42

Overall length 468 mm

Net weight 2.1 kg

Rated voltage D.C. 12 V

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

END005-3

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

󺹮 Read instruction manual.

󺹮 Wear eye protection.

󺹮 Wear ear protection.

󺹮 Wear a helmet, goggles and ear

protection.

󺹮 Use appropriate protection for foot-leg

and hand-arm.

󺹮 Do not expose to rain.

󺹮 Hold the saw with both hands while

working! One-handed use is extremely

hazardous!

󺹮 This saw is to be used by properly

trained operators only.

󺹮 Only for EU countries

Do not dispose of electric equipment or

battery pack together with household

waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment, 2006/66/EC on

batteries and accumulators and waste

batteries and accumulators and their

implementation in accordance with

national laws, electric equipment and

battery pack that have reached the end

of their life must be collected separately

and returned to an environmentally

compatible recycling facility.

ENE031-2

Intended use

The tool is intended for cutting branches.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

) : 80 dB(A)

Uncertainty (K) : 3.38 dB(A)

The noise level under working may exceed 80 dB (A).

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Work mode : cutting wood

Vibration emission (a

) : 8.9 m/s

Uncertainty (K) : 2.6 m/s

ENG901-1

•

The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

Ni-MH

Li-ion

1 2 3 ... 12

Comments to this Manuals

No comments

Makita UC120D Instruction Manual Page 2

Comments to this Manuals

Related products and manuals for Power tools Makita UC120D